Hempel Thinner 08450

Opis produktu

Hempel Thinner 08450 – High-quality thinner for epoxy paints. Developed to improve the flow of a wide range of Hempel epoxy products and others. Can also be used as a cleaning agent for pumps and tools before and after painting., hempel paints are produced and supplied at a viscosity where thinning is not necessary, provided the paint is thoroughly mixed. However, if the paint is to be applied in thin coats (for example as a "tie coat") or if the paint is too thick, for example in low temperatures, the recommended Hempel thinner specified in the relevant technical data sheets can be added to achieve the viscosity best suited to the application. As a general rule, thinning should be minimal so that the quality of the coatings is not impaired by excessive thinning. However, if application takes place at high temperatures (air or substrate), the amount of thinner added may even exceed the amount specified in the technical data sheet. This prevents spray drying and achieves a proper coating., product intended exclusively for professional use. Painters and operators should be trained, experienced and have the capability and equipment to mix and apply coatings correctly in accordance with Hempel's technical documentation. During work, painters and operators should use appropriate personal protective equipment. These guidelines have been issued based on current knowledge of the product. oraz warning! The product packaging may differ slightly from that shown in the image depending on the selected product capacity. Product quality remains consistent and parameters comply with the safety data sheet..