Sigmadur clearcoat – polyurethane resin

Opis produktu

Sigmadur clearcoat – Two-component, aliphatic, acrylic, colourless gloss primer-enamel polyurethane. Suitable as an undercoat for epoxy primer-enamels and resin floors, and works excellently on aluminium-pigmented polyurethanes. High resistance to abrasion, excellent gloss properties. Enhanced resistance to mineral oils, splashing, paraffin and other chemical substances. Curing at temperatures as low as –5°C. Resin suitable for stainless steel and non-ferrous metals., product intended exclusively for professional use. Applicators must be trained, experienced and have the facilities and equipment for mixing and proper application of coatings in accordance with Sigma technical documentation. During work, applicators must use appropriate personal protective equipment. These guidelines have been developed based on current knowledge of the product. Any suggested deviations depending on site conditions must be approved by the responsible Sigma representative before work begins. Please note the warnings on the packaging. Use in well-ventilated conditions. Do not inhale product vapours or mist. Avoid contact with skin. Contaminated skin should be cleaned immediately with appropriate cleaning agent, soap and water. Rinse eyes with large amounts of water and seek medical assistance immediately. oraz remember! Make an informed decision before purchase – most paints in our shop are machine-tinted! In accordance with shop regulations, paints tinted in this manner are not subject to return or exchange. Products are tinted on your order. Make your purchase thoughtfully..