Polyurethane Thinner – Hempel Thinner 08080

Description

Hempel Thinner 08080 – This is a top quality thinner for polyurethane paints. Developed to improve the spreadability of a range of polyurethane products from Hempel and beyond. It can also be used as a cleaner for pumps and tools after and before painting. Product not available in markets. Hempel paints are manufactured and supplied in such viscosity that dilution is not necessary, provided the paint is thoroughly mixed. However, if the paint is to be applied in small thicknesses (for example, as a “seal coat”) or if the paint is too thick, such as at low temperatures, the indicated Hempel’s Thinner(s) in the relevant data sheets can be added to achieve the viscosity most suitable for application. As a general rule, dilution should be minimal so that the quality of coatings does not deteriorate due to excessive dilution. However, if the application is made at high temperatures (air or substrate), the amount of thinner added may even exceed the amount specified in the data sheet. This avoids dry spraying and achieves a proper coating.

This product is intended for professional use only. Applicators and operators should be trained, experienced, and have the capabilities and equipment to mix/mix and properly apply coatings according to Hempel’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment. These guidelines are given based on current product knowledge.

Remember! Product packaging may differ slightly from that pictured, depending on your choice of product capacity. The quality of the product remains consistent and the parameters are in accordance with the safety data sheet.