Polyurethane Thinner – Baril Thinner 5801
Baril Thinner 5801 – It is the highest quality thinner for epoxy paints. A thinner designed to improve the flow of Baril epoxy products and more. Can also be used as a pump and tool cleaner after and before painting. The product is not available in supermarkets.
Delivery throughout the European Union: 5-7 days
Baril Thinner 5801 – It is the highest quality thinner for epoxy paints. Thinner designed to improve the flow of Baril polyurethane products and more. Can also be used as a pump and tool cleaner after and before painting. The product is not available in supermarkets. Baril paints are produced and delivered in the right viscosity, while if the paint is too thick, for example at low temperatures, it is recommended to add the thinner in the appropriate proportions, according to the technical sheet of the product. As a general rule, thinning should be minimal so that the quality of the coatings does not deteriorate due to excessive thinning – however, if the application is carried out at high temperatures (air or substrate), the amount of thinner added may even exceed the amount specified in the data sheet. This avoids dry spraying and provides the correct coating.
This product is intended for professional use only. Applicators and operators should be trained, experienced, and have the capabilities and equipment to mix/mix and properly apply coatings according to Hempel’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment. These guidelines are given based on current product knowledge.
Remember! Product packaging may differ slightly from that pictured, depending on your choice of product capacity. The quality of the product remains consistent and the parameters are in accordance with the safety data sheet.
Type of paintThinner
Capacity5 l lub 20l
UsageFor polyurethane paints