Epoxy paint – Sigmafast 205 4 L
SIGMAFAST 205 – Two-component epoxy product – High-solids primer containing zinc phosphate, cured with polyamide. High resistance to abrasion, mechanical damage or rust. The paint works in most polyurethane or epoxy systems. Highly flexible coating to protect various types of surfaces. Protection for industry and construction, mainly various types of steel and concrete substrates.
Perfect paint for substructures like:
Delivery throughout the European Union: 5-7 days
SIGMAFAST 205 – This is an extremely strong chemical, two-component primer paint. High solids epoxy containing zinc phosphate, cured with polyamide. The product cures very quickly and is resistant to most weather conditions except UV. High resistance to abrasion, mechanical damage or rust. Can be repainted with most polyurethane or epoxy systems. The coating is very flexible to protect steel and concrete, in addition, it is airtight and impermeable to water. It serves as a primer or
This product is intended for professional use only. Applicators and operators should be trained, experienced and have the capability and equipment to mix/mix and properly apply coatings according to Sigma’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment. These guidelines are given based on current product knowledge. All suggested deviations according to site conditions should be forwarded to the responsible Sigma representative for approval before work begins. Please pay attention to the warnings on the container. Use under well-ventilated conditions. Do not inhale product vapor or mist. Avoid contact behind the skin. Skin contamination should be immediately rubbed with a suitable cleanser,soap and water. Rinse eyes with plenty of water and seek medical attention immediately.
Remember! Make an informed decision before you buy, most of the paints in our store are machine-colored! According to the store’s terms and conditions, paints pigmented in this way are not returnable or exchangeable. The products are dyed to your order, Please purchase thoughtfully.
Type of paintEpoxy paint
Durability15 - 20 L (in the Epoxy + Polyurethane system)
Performance9,3 m2/l for 75 μm - 4,7 m2/l for 150 μm
SurfaceSigmadur 550, Sigmadur 520, Sigmafast 210, Sigmafast 210 HS
Recommended thinnerSigma Thinner 91-92
Dry to recoat time10 °C - 6 hours, 20 °C - 3-4 hours, 30 °C - 2-3 hours (substrate temperature)
Solid content70 ± 2%