Epoxy paint – Sigmacover 280 20 L
Sigmacover 280 – A very strong epoxy – a two-component primer enamel based on pure epoxy with wide application for steel, non-ferrous metals or concrete floors. Thanks to its good resistance to water penetration and corrosion, we can use it as a primer when protecting many surfaces.Any type of sigma brand paint and other industrial paints can be applied to the primer.
Perfect paint for substructures like:
Delivery throughout the European Union: 5-7 days
Sigmacover 280 – A very strong epoxy – two-component primer enamel based on pure epoxies with wide application for steel and non-ferrous metals. Thanks to its good resistance to water penetration and corrosion, we can use it as a primer in the protection of decks, above-water parts, ballast tanks, oil cargo tanks or hulls in addition, the paint works well in the preservation of various types of concrete substrates. Any type of sigma brand paint and other industrial paints can be applied to the primer. The product has excellent adhesion to rust and also has a hydro-blocking function. High abrasion protection is also one of the most important advantages of this product
This product is intended for professional use only. Applicators and operators should be trained, experienced and have the capability and equipment to mix/mix and properly apply coatings according to Sigma’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment. These guidelines are given based on current product knowledge. All suggested deviations according to site conditions should be forwarded to the responsible Jotun representative for approval before starting work.
Remember! Make an informed decision before you buy, most of the paints in our store are machine-colored! According to the store’s terms and conditions, paints pigmented in this way are not returnable or exchangeable. The products are dyed to your order, Please purchase thoughtfully.
Type of paintEpoxy paint
Durability15 - 25 years (depending on the system and number of layers)
SurfaceSigmadur 520, Sigmadur 550, Sigmafast 210HS, Steelguard 2458
Recommended thinnerSigma Thinner 91-92
Dry to recoat time2h - 40°C, 3h - 30°C, 20°C - 5h (substrate temp.)
Capacity20 l (Farba + utwardzacz)
Solid content57 ± 2 %
UsageMarine Industry, Land Industry