Construction paint – Sigmacover 456 20 L
Sigmacover 456 – The most durable of the epoxies – two-component, thick-coat, polyamide-cured. Primer enamel, based on pure epoxy with wide application for steel, non-ferrous metals or concrete. Cured even at -10°C (14°F).
Perfect paint for substructures like:
€249,75




From: €249,75
Description
Sigmacover 456 – The most durable of the epoxies – a two-component, thick-coat, polyamide-cured paint. Primer enamel, based on pure epoxy with wide application for steel, non-ferrous metals or concrete. Cured even at -10°C (14°F). Resistance to less well-prepared substrates, impact or abrasion. Top quality product based on strong epoxy resins. Good adhesion to old epoxy, alkyd and chlorinated rubber coatings.
The biggest advantages – Thanks to its good resistance to water penetration and corrosion, we can use it as a primer in the protection of decks, above-water parts, steel structures, concrete structures, tanks, silos, ship hulls, in addition, the paint works well in the maintenance of various types of concrete substrates. Smooth coating, easy to clean, resistant to chemicals. Top quality product based on strong epoxy resins. High relative humidity max. 95% during the curing application does not affect the quality of the coating. Read an article about painting structures (click here)
This product is intended for professional use only. Applicators and operators should be trained, experienced and have the capability and equipment to mix/mix and properly apply coatings according to Sigma’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment.
Remember! Make an informed decision before you buy, most of the paints in our store are machine-colored! According to the store’s terms and conditions, paints pigmented in this way are not returnable or exchangeable. The products are dyed to your order, Please purchase thoughtfully.
Additional information
Brand
SigmaShipment
1-2 daysType of paint
Epoxy PaintDurability
15 - 25 years (depending on the system and number of layers)Performance
75 μm - 8,7 m2/l - 100 μm - 6,5 m2/l - 150 μm - 4,3 m2/lMating
ExcellentFinish
Semi-glossSurface
Sigmadur 520, Sigmadur 550, Sigmafast 210HS, Steelguard 2458Recommended thinner
Sigma Thinner 91-92Dry to recoat time
2h - 40°C, 5h - 30°C, 20°C - 8h (surface temp.)Capacity
20 l (Farba + utwardzacz)Solid content
65 ± 2 %Parts amount
2Weight
28kgUsage
Maritime industry, Land industry, Steel structures

Reviews
There are no reviews yet.