Epoxy paint – Tikkurila – Temacoat GPL-S Primier 20 L

Description

Tikkurila – Temacoat GPL-S Primier – A two-component, polyamide-cured high build epoxy primer containing zinc phosphate. Recommended for long-term protection of bridges, steel structures, transport equipment, cranes, etc. Temacoat Primer is a high solids paint containing anti-corrosive pigments. Temacoat GPL-S Primer is quick overcoatable and can be used as a primer or intermediate coat on steel, galvanized or aluminum surfaces exposed to abrasion and chemical attack. In a set with a special hardener, it can be applied at low temperatures.

This product is intended for professional use only. Applicators and operators should be trained, experienced, and have the capabilities and equipment to mix/mix and properly apply coatings according to Tikkurila’s technical documentation. During work, applicators and operators should use appropriate personal protective equipment. These guidelines are given based on current product knowledge.
All suggested deviations according to the conditions at the work site should be submitted to the responsible Tikkurila representative for approval before starting work.

✔ Remember! Make an informed decision before you buy, most of the paints in our store are machine-colored! According to the store’s terms and conditions, paints pigmented in this way are not returnable or exchangeable. Products are dyed to your order, Please purchase thoughtfully.